注: 建议图片大小150px*50px 
丨
English
注: 建议图片大小150px*50px 
 |
| Quantity: | |
|---|---|
Technical Parameters
Raw material | 1) Al tube:￠8.0×0.7～1mm |
2) Al fin:Bare Al fin thickneww T=0.15～0.25mm | |
3)Side plate:Al plate T=0.8～1.5mm | |
Application | refrigerator and freezer |
Key process | Tube Bending,fin punching,Tube expanding,Degreaesing,Welding and assembling,Leakage test,Drying,Inspection,Packing |
Technical Standards | 1) Diagonal-inserting style:50×19.05×N；60×19.05×N（N≥4） |
2)Pull-expanding style:60×28；52×28 | |
3)Press-expanding style:50.8×203.2 | |
Can design and produce according to drawing,samples and requirements from clients | |
Performance | Can satisfy all capability requirements for refrigerator |
Cooling System Tube Inside Standards | ||||||
Inner Volume(cm³) | ≤100cm³ | 101～200 | 101～400 | 401～800 | ||
Residual Moisture(mg) | ≤10 | ≤20 | ≤25 | ≤30 | ||
Residual lmpurity(mg) | ≤100mg/100cm³ | |||||
Biggest single impurity | ≤2mg | |||||
Technical Parameters
Raw material | 1) Al tube:￠8.0×0.7～1mm |
2) Al fin:Bare Al fin thickneww T=0.15～0.25mm | |
3)Side plate:Al plate T=0.8～1.5mm | |
Application | refrigerator and freezer |
Key process | Tube Bending,fin punching,Tube expanding,Degreaesing,Welding and assembling,Leakage test,Drying,Inspection,Packing |
Technical Standards | 1) Diagonal-inserting style:50×19.05×N；60×19.05×N（N≥4） |
2)Pull-expanding style:60×28；52×28 | |
3)Press-expanding style:50.8×203.2 | |
Can design and produce according to drawing,samples and requirements from clients | |
Performance | Can satisfy all capability requirements for refrigerator |
Cooling System Tube Inside Standards | ||||||
Inner Volume(cm³) | ≤100cm³ | 101～200 | 101～400 | 401～800 | ||
Residual Moisture(mg) | ≤10 | ≤20 | ≤25 | ≤30 | ||
Residual lmpurity(mg) | ≤100mg/100cm³ | |||||
Biggest single impurity | ≤2mg | |||||
